Lexmark CX331 User Manual page 97

Use printer menus
Menu item
DDNS TTL
Default TTL
DDNS Refresh Time
Enable mDNS
Off
On*
WINS Address
Enable BOOTP
Off*
On
Restricted Server List
Restricted Server List Options
Block All Ports*
Block Printing Only
Block Printing and HTTP Only
MTU
Raw Print Port
1–65535 (9100*)
Outbound Traffic Maximum
Speed
Disabled*
Enabled
Enable TLSv1.0
Off
On*
Enable TLSv1.1
Off
On*
SSL Cipher List
Note: An asterisk (*) next to a value indicates the factory default setting.
SNMP
Note: This menu appears only in network printers or printers that are attached to print servers.
Description
Specify the current DDNS settings.
Update multicast DNS settings.
Specify a server address for Windows Internet Name Service (WINS).
Allow the BOOTP to assign a printer IP address.
Specify an IP address for the TCP connections.
Notes:
•
This menu item appears only in some printer models.
•
Use a comma to separate each IP address.
•
You can add up to 50 IP addresses.
Specify how the IP addresses in the list can access the printer functionality.
Note: This menu item appears only in some printer models.
Specify a maximum transmission unit (MTU) parameter for the TCP connections.
Specify a raw port number for printers connected on a network.
Enable the printer maximum transfer rate.
Enable the TLSv1.0 protocol.
Enable the TLSv1.1 protocol.
Specify the cipher algorithms to use for the SSL or the TLS connections.
97