Lexmark CX331 User Manual page 54

Use printer menus
Menu item
Flash Drive Access
Enabled*
Disabled
One Page Flatbed Scanning
On
Off*
Screen Timeout
5–300 (60*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Remote Operator Panel
Menu item
External VNC Connection
Don't Allow*
Allow
Authentication Type
None*
Standard Authentication
VNC Password
Note: An asterisk (*) next to a value indicates the factory default setting.
Notifications
Menu item
ADF Loaded Beep
Off
On*
Alarm Control
Off
Single*
Continuous
Supplies
Show Supply Estimates
Show estimates*
Do not show estimates
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Enable access to the flash drive.
Set copies from the scanner glass to only one page at a time.
Set the idle time in seconds before the display shows the home
screen, or before the printer logs off a user account
automatically.
Description
Connect an external Virtual Network Computing (VNC) client
to the remote control panel.
Set the authentication type when accessing the VNC client
server.
Specify the password to connect to the VNC client server.
Note: This menu item appears only if Authentication Type is
set to Standard Authentication.
Description
Enable a sound when loading paper into the ADF.
Note: This menu item is available only in some printer
models.
Set the number of times that the alarm sounds when the printer
requires user intervention.
Note: This menu item is available only in some printer
models.
Show the estimated status of the supplies.
54