Establishing A Connection With The Software Tools; Configuring The Firewall - Siemens SINUMERIK 808D ADVANCED Commissioning Manual

5. Select desired languages you want to install.
6. If you have installed an earlier version of a program, un-install the program first, then start the installation again and
select the required software from the list.
7. During the installation, various dialog boxes will appear. Acknowledge the dialog boxes and enter and confirm the
installation information where necessary. Installing all the software packages will take approximately 30 minutes. When
the installation finishes, shortcuts will be created on the desktop.
2.2.2

Establishing a connection with the software tools

2.2.2.1

Configuring the firewall

Secure access and communication is achieved through the security function of the integrated firewall. To connect the
software tools successfully, you must first enable the corresponding communication ports in the firewall configuration.
Operating sequence
+
Commissioning Manual
01/2017
1. Select the system data operating area on the PPU.
2. Press this key to view the extended softkeys.
3. Open the window for firewall configuration through the following softkey operations:
→ →
43