Raypak Xfiire 300B Installation And Operation Manual page 49

Figure 57. Use Interface
Menu - Initial Adjustment
To change settings on the touchscreen, press MENU icon,
Adjust icon, System settings, System menu to open Adjust
Settings menu. The ADJUST menu allows the installer to
make adjustments to items shown in Table W.
Refer to the VERSA IC Manual (5000.72) for detailed
setup instructions.
Item Application
OUTDOOR H MODE 1, 2, 3
Target H MODE 1, 2, 3
SUPPLY H MODE 1, 2, 3
IND SUPPLY H MODE 3
Boil OUTLET All
Boil INLET All
Boil ΔT All
DHW SUPPLY H MODE 2, 3
TANK WH
Heater STATUS All
Outdoor air temperature, available when TARGET = RSET in ADJUST menu
Current target temperature, available when Target = SETP in the ADJUST menu
(default), and (EMS / MODB)
Current system supply temperature
Current temperature being supplied to the indirect system
Current heater outlet temperature
Current heater inlet temperature
Current temperature difference between heater outlet and heater inlet
Current indirect DHW supply temperature
Current Tank Temperature
IDLE, PREPURGE, IGNITION MOD RATE %, POSTPURGE, SOFTLOCK,
HARDLOCK
Table V. System View
Description
49