Dometic Frigo DC Operating Manual page 8

Operation
➤ Press the
✓ The control unit performs a control test.
3
Fig. 3: Switching on the refrigeration system
✓ Then the display shows the current cargo space temperature (1).
✓ If required, the refrigeration system switches on and the symbols
and
I
NOTE
The symbols for the compressor
activation of the functions is delayed.
With a cargo space temperature above +15 °C, initially only
After a delay for functional reasons, the evaporator fan is switched on and
lights up.
If the outside temperature is high, the fan may initially alternate between
switching on and off until the cargo space has cooled down sufficiently.
5.3 Switching off the refrigeration system
A
NOTICE!
Never switch the refrigeration system off during a defrosting process as other-
wise any possible ice on the evaporator surface may reduce the air output and
thus the cooling capacity is no longer guaranteed.
I
NOTE
Switching the refrigeration system off does not influence the last entered target
value. This is automatically saved every time it is changed.
Switching off the refrigeration system
➤ Switch the ignition off.
✓ The refrigeration system automatically turns off.
8
button for a few seconds until the display is active.
P
(3) light up.
1
and evaporator fan
Frigo DC
2
3
(2)
flash, if the
lights up.
EN