Dometic Frigo DC Operating Manual page 19

Frigo DC
9.2 Fault messages
Refrigeration system fault messages are shown on the display with correspond-
ing fault codes. The symbol
➤ Press the
I
NOTE
Fault messages are automatically deleted after the rectification of the cause.
8
Fig. 8: Fault code display/alarm
Fault
code
EN
flashes and a warning signal sounds.
button to acknowledge the warning signal.
P
Cause
Maintenance is due.
The refrigeration system func-
tions can no longer be started.
The cargo space door is open.
(The door status function is
only possible if the cargo
space door is additionally
installed with a door contact
switch.)
There is an undervoltage at the
power supply for the ignition.
Result/measure
The refrigeration system continues to
run, but the information remains indi-
cated on the display:
➤ Contact your service partner.
➤ Turn off the refrigeration system.
➤ Contact your service partner.
The refrigeration system is switched off:
➤ Close the cargo space door.
The voltage for the ignition is not suffi-
cient:
➤ Turn off the refrigeration system.
➤ Switch unnecessary consumer units
off, such as the mirror or front wind-
shield heating, etc.
➤ Contact your service partner.
Faults
19