10.4
Coordinate systems
10.4.1
Overview
Definitions
DIN 66217 stipulates that machine tools must use right-angled, rectangular (Cartesian)
coordinate systems. The positive directions of the coordainate axes are determined using the
"Right Hand Rule". The coordinate system is related to the workpiece and programming takes
place independently of whether the tool or the workpiece is being traversed. When
programming, it is always assumed that the tool traverses relative to the coordinate system of
the workpiece, which is intended to be stationary.
Figure 10-9
Figure 10-10 Clockwise, rectangular Cartesian coordinate system
Basic Functions
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Right-hand rule
K2: Axis Types, Coordinate Systems, Frames
10.4 Coordinate systems
681