Data Lists; Machine Data; Channelspecific Machine Data; Axis/Spindlespecific Machine Data - Siemens SINUMERIK 840D sl Function Manual

P1: Transverse axes

12.6 Data lists

Program code
N30 Y200 X200
N40 DIAMONA[Y]
N50 Y250 X300
N60 SETM(1)
N70 WAIT(1,2)
Channel 2
...
N50 DIAMOF
...
N100 WAIT(1,1)
N110 GETD(Y)
N120 Y100
12.6 Data lists
12.6.1

Machine data

12.6.1.1

Channelspecific machine data

Number Identifier: $MC_
20050 AXCONF_GEOAX_ASSIGN_TAB[n]
20060 AXCONF_GEOAX_NAME_TAB[n]
20100 DIAMETER_AX_DEF
20110 RESET_MODE_MASK
20112 START_MODE_MASK
20150 GCODE_RESET_VALUES[n]
20152 GCODE_RESET_MODE[n]
20360 TOOL_PARAMETER_DEF_MASK
20624 HANDWH_CHAN_STOP_COND
27100 ABSBLOCK_FUNCTION_MASK
12.6.1.2

Axis/spindlespecific machine data

Number Identifier: $MA_
30460 BASE_FUNCTION_MASK
820
Comment
;Dimensions: X in the diameter, Y in the radius
;Y axis-specific modal diameter programming
;Dimensions: X and Y in diameter
;Synchronous marker 1
;wait for synchronous marker 1 in channel 2
;channel 2 no diameter programming active
;wait for synchronous marker 1 in channel 1
;Axis replacement direct Y
;Y is the channel-specific diameter programming
;subordinated in channel 2; i.e. dimension in the radius
Description
Assignment of geometry axis to channel axis
Geometry axis name in channel
Geometry axis with transverse axis function
Definition of control basic setting after powerup and RESET /
part program end
Definition of the control basic settings for NC start
Reset G groups
G code basic setting at RESET/end of parts program
Definition of tool parameters
Definition of the behavior of traveling with handwheel
Parameterize block display with absolute values
Description
Axis functions
Function Manual, 01/2015, 6FC5397-0BP40-5BA2
Basic Functions