Sony DHR-1000 Operating Instructions Manual page 74

Editing with LANC cable
Video insert editing
(continued)
Tips
• To execute V.O.S (video on
sound) editing:
1 Record the audio.
2 Follow the insert editing
procedure to record the
video.
• You can insert audio with
the video by pressing the
STEREO1 INSERT or/and
STEREO 2 INSERT button(s)
in step 4.
If you do not want to stop
insert editing when the
counter comes to
"0H00M00S," change the
counter display to the time
code.
74
Editing
3
Locate the start point (B) of the
scene to be recorded over.
Locate the beginning of the scene to be
recorded over with the jog dial or
shuttle ring.
4
Press VIDEO INSERT.
The indicator lights up.
5
Locate the playback start point
(C) of the source tape.
1 Press PLAYER.
2 Press ( (PLAY), then locate the
playback start point with the jog dial
or shuttle ring.
3 Release the jog dial or the shuttle ring
at the beginning of the source scene.
The EDIT STANDBY indicator lights.
6
Press START/PAUSE.
The other VCR starts playback and this
VCR starts recording.
When the tape counter reached
"0H00M00S," the EDIT STANDBY
indicator turns off and this VCR stops
while the other VCR continues playing.
To stop the other VCR, press PLAYER,
then p (STOP).
To stop recording manually, press
START/PAUSE.