Sony DHR-1000 Operating Instructions Manual page 69

Notes
If you press p STOP to stop
editing, the source picture
may be recorded after it
stops.
This procedure is not
possible if you connect this
VCR to the DCR-VX1000/
VX700/PC7 digital video
camera via the DV cable and
you use this VCR as the
playback machine.
• If you record on the
beginning part of the tape,
or on the part just after an
unrecorded portion, the
first part of the recording
may be dropped.
• When you record on a new
or fully rewound tape, do a
trial recording for about 15
seconds, then start the
actual recording. If you
start the actual recording
from the beginning of the
tape, the first part may not
be recorded when you play
back the tape on another
VCR.
5
Search for the point to resume
recording (B).
1 Press PLAYER and start playing the
tape.
2 Locate the point with the jog dial or
shuttle ring.
3 Set the other VCR to playback pause.
6
Press START/PAUSE to resume
recording.
7
To cut out other scenes, repeat
steps 4 to 6.
8
To finish editing, press START/
PAUSE to set the VCRs to
recording pause, then press EDIT
STANDBY.
Both VCRs stop.
69
Editing