Sony DHR-1000 Operating Instructions Manual page 41

Tip
• To cancel the procedure,
press VCR Plus+ before
pressing ONCE, DAILY, or
WEEKLY.
Notes
• If the VCR beeps repeatedly,
this means that:
– The PlusCode is incorrect.
– ONCE, DAILY, or
WEEKLY was selected
incorrectly. You cannot
select DAILY or WEEKLY
for a program that airs
more than seven days
ahead.
• If you timer record a
program that is encoded
with copyright protection
signals, the VCR will
continue recording but the
video and audio signals will
not be recorded on tape.
To stop recording
To stop the VCR while recording, press p STOP.
To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press POWER.
"TIMER" disappears and the VCR switches on. Remember to press
POWER to reset the VCR in timer recording standby after using the
VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter
• Display the tape counter on the TV screen with the DISPLAY button.
• Check the timer settings.
• Watch another TV program.
41
Basic Operations