Sony DHR-1000 Operating Instructions Manual page 25

Hookup 6: VCR setup
1
Set the RF UNIT switch to CH 3 or CH 4, whichever
channel is not used in your area. If both are used,
set the switch to either channel.
If you made A/V connections (from page 12), you
can skip this step.
For details, see page 92.
2
Set the A/B switch to "A."
3
Press EASY SET UP on the VCR.
The SET UP menu appears.
1 The CLOCK SET menu
appears. Select AUTO and
press EXECUTE.
For details, see page 27.
2 The CABLE BOX menu
appears. Set CABLE BOX
CONTROL to OFF and
press EXECUTE.
For details, see page 33.
3 The TUNER PRESET menu
appears. Set ANTENNA/
CABLE to CABLE and press
EXECUTE.
For details, see page 30.
4 The AUTO PRESET starts.
For details, see page 30.
Normal display ?
4
Preset the cable box output channel (usually 2, 3 or 4).
Press MENU and select
TUNER PRESET.
For details, see page 31.
Hookup 6: VCR Plus+ channel setup
1
Find the VCR Plus+ Channel Listing in your
program guide. For details on the VCR Plus+
Channel listing, see page 36.
2
For unscrambled channels, if the channels in the
program guide are different from the channels that
you actually use on your TV, set the channels that
are different as follows:
Press MENU and select
SET VCR Plus+
CHANNELS.
For details, see page 37.
3
For scrambled channels, enter all the scrambled
channels you want to record and the cable box
output channel (usually 2, 3, or 4):
Press MENU and select
SET VCR Plus+
CHANNELS.
For details, see page 37.
Set MANUAL SET to ADD
and press EXECUTE.
Enter the program guide
channel, then the channel
you use on your TV.
Program guide channel
Your actual TV channel
Press EXECUTE.
Enter the program guide
channel, then the cable
box output channel.
Program guide channel
Your cable box channel
Press EXECUTE.
(continued)
25
Getting Started