Mobile Stream - EverFocus VANGUARD 16x8H Plus User Manual

H.265 VANGUARD 16x8H Plus

4.2.1.3 Mobile Stream

Mobile stream defines the video quality which is being viewed via remote access through
mobile devices. Note that Mobile Stream is only available for IP cameras.
i-Frame
Channel: Displays channel number.
Switch: Check the box to enable the Mobile Stream function.
Stream Type: Displays the stream type, which represents the Record Mode, Normal (4K) or
5MP, of the channel. To change the record mode, please refer to 4.9.1 General.
Resolution: Select a recording resolution.
FPS: Select a FPS (frames per second) for the recording. Please note that the FPS options
may differ if you select Normal Mode (4K) or 5MP Mode for Record Mode (please refer to
4.9.1 General).
Video Encode Type: This option is only for IP cameras. Select H.264 or H.265 based on your
IP cameras.
Bitrate Control: Select CBR (constant bitrate) if the scene is simple and less changing, such
as a gray wall. Select VBR (variable bitrate) if the scene is complex, such as a department
store. If VBR is selected, select a video quality next to Bitrate Control.
Bitrate Mode: Select User-defined to set up bitrate manually; or Predefined to auto-select
bitrate.
Bitrate: The Bitrate corresponds to the speed of data transfer that the DVR will use to record
video. Recordings that are encoded at higher bitrates, will be of better quality.
Audio: Select this option if you want to record audio along with video. Please ensure the
camera supports audio function and a microphone has been connected to the DVR.
i-Frame: Input an i-Frame interval.
Copy: You can apply the same configurations from one channel to other channels. Select a
channel from the Source Channel drop-down list and then select the parameters you would
like to apply to other channels. Select the desired channels from the Target Channel field
and then click the Copy button.
Default: Click to apply the default setting.
Apply: Click to save the settings.
67