Preset Setting - EverFocus VANGUARD 16x8H Plus User Manual

3.5.2.2 Preset Setting

Click Preset to enter the Preset Setting panel. On this panel, you can set up Preset positions,
perform the Go to Preset function and also perform the Tour function.
Preset Setting Panel
To set up Preset Points:
1. Click on the No. input box and input a preset number (1-255).
2. Click on the Time input box to set up a dwell time for this preset number (for Tour
function).
3. Use the direction buttons or Zoom/Focus/Iris buttons to search for the location for this
preset number.
4. Click the button to save this preset point and then jump to the next preset number
for configuration. Follow Step 2-3 to set up multiple preset points.
5. After setting up the preset points, click the Save button to save the settings.
6. To clear the setup preset points, select a preset number in the No. input box and then
click the Clear button
number on the Preset List.
Select a channel
Click to enter the Preset Setting
panel
Direction Buttons / Auto Pan Button
Preset / Tour Setting
Preset List
. Or you can also click the Clear button of a specific preset
28
H.265 VANGUARD 16x8H Plus