Snapshot - EverFocus VANGUARD 16x8H Plus User Manual

H.265 VANGUARD 16x8H Plus
4.2.3

Snapshot

On this page, you can configure the snapshot parameters or set up the snapshot schedule.
4.2.3.1 Snapshot
On this page, you can configure the snapshot parameters.
Channel: Displays the channel number.
Auto Snapshot: Check the box to enable the Auto Snapshot function. For this function to
work, you will have to configure the Snapshot Schedule. Please refer to 4.2.3.2 Snap.
Schedule.
Stream Type: Select main stream or sub stream for the snapshot image.
Normal Interval: Configure an interval to automatically take a normal snapshot. For this
function to work, you will have to configure the Snapshot Schedule. Please refer to 4.2.3.2
Snap. Schedule.
Alarm Interval: Configure an interval to automatically take a snapshot when motion, IO
alarm is triggered. For this function to work, you will have to configure the Snapshot
Schedule. Please refer to 4.2.3.2 Snap. Schedule.
Snapshot Resolution: Select a resolution for the alarm snapshot image.
Snapshot Quality: Select an image quality for the alarm snapshot image.
Copy: You can apply the same configurations from one channel to other channels. Select a
channel from the Source Channel drop-down list and then select the parameters you would
like to apply to other channels. Select the desired channels from the Target Channel field
and then click the Copy button.
Default: Click to apply the default setting.
70