Channel; Ip Channels - EverFocus VANGUARD 16x8H Plus User Manual

4.1 Channel

In this section, you are allowed to configure the settings including analog cameras, IP cameras,
live view display, PTZ setup, motion setup and more.
4.1.1 Channel

4.1.1.1 IP Channels

This page will only appear when HVR hybrid mode is selected (OSD < System < General). You
can add IP cameras manually or automatically using this page.
You can add IP cameras manually or automatically using this page.
Search: Click to search for the IP cameras on the network. The searched IP cameras will be
displayed on the upper list.
Add: Click to manually add IP camera one by one to the DVR. The added IP camera will be
displayed on the lower list.
Add All: Click to automatically add the first 2/4/8 IP cameras to the DVR based on the
supported number of IP camera of your device. Please refer to 4.1.1.2.1 Auto Add IP
Cameras for more details.
Camera Search: The added IP camera would not be able to connect to the DVR if its IP
address is not on the same network segment with the DVR. Therefore, you can use this
function to reassign an IP address to all added IP cameras with the same network segment
as DVR's.
H.265 VANGUARD 16x8H Plus
32