Auto Add Ip Cameras; Manually Add Ip Cameras - EverFocus VANGUARD 16x8H Plus User Manual

4.1.1.2.1 Auto Add IP Cameras

To automatically add all searched IP cameras to DVR, click Search and then click the Add All
button. The DVR will add the first 2/4/8 IP cameras to the DVR based on the supported
number of IP camera of your device.

4.1.1.2.2 Manually Add IP Cameras

1. Click Add to bring-up the Add IP Camera page.
2. Click Search to search for the IP cameras on the network. Note that the IP cameras that
have been added to the DVR will not be displayed.
3. To select an IP camera, click an IP camera on the list, the clicked IP camera will be
highlighted with a blue background.
4. Configure the IP camera settings at the lower section.
IP Address/Domain: Input the IP address or domain name of the IP camera.
Alias: Input a channel name for the IP camera.
Position: Select a position to display the camera name on the live channel.
Port: Port of the IP camera.
Protocol: Select a protocol. For Custom protocol, please refer to 4.1.1.3 Protocol Manage.
User Name: Input the user name of the IP camera.
Password: Input the password of the IP camera.
Bind Channel: Select a channel for the IP camera to be applied to.
5. Click Add and the IP camera will be added to the channel.
H.265 VANGUARD 16x8H Plus
34