EverFocus EPHD16+U User Manual
  1. Manuals
  2. Brands
  3. EverFocus Manuals
  4. DVR
  5. EPHD16+U
  6. User manual

EverFocus EPHD16+U User Manual

16ch, 1080p, real-time, universal dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EPHD16+U
16CH, 1080p, Real-time, Universal DVR
User's Manual
Copyright © EverFocus Electronics Corp,
Release Date: July, 2014
Notice: This content is subject to be changed without notice.

Advertisement

Table of Contents
loading

Related Manuals for EverFocus EPHD16+U

Summary of Contents for EverFocus EPHD16+U

  • Page 1 EPHD16+U 16CH, 1080p, Real-time, Universal DVR User’s Manual Copyright © EverFocus Electronics Corp, Release Date: July, 2014 Notice: This content is subject to be changed without notice.
  • Page 2 All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the Everfocus Electronics Corporation. Release Date: July, 2014 QuickTime is a registered trademark of the Apple Computer, Inc.

  • Page 3: Safety Precautions

    Safety Precautions  Refer all work related to the installation of this product to qualified service personnel or system installers.  Do not block the ventilation openings or slots on the cover.  Do not drop metallic parts through slots. This could permanently damage the appliance. Turn the power off immediately and contact qualified service personnel for service.
  • Page 4 Follow Instructions  All operating and use instructions should be followed. Cleaning  Unplug the unit from the outlet before cleaning. Do not use liquid cleaners, abrasive or aerosol cleaners. Use a damp cloth for cleaning Attachments  Do not use attachments not recommended by the product manufacturer as they may cause hazards.
  • Page 5 This Product is RoHS compliant. Your EverFocus product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and...

  • Page 6: Table Of Contents

    TABLE OF CONTENTS 1. Introduction ........................1 Features........................3 Packing List ........................4 Optional Accessories ....................5 Dimensions ........................5 Front Panel ........................6 Rear Panel ........................8 2. Installation ........................9 Coaxial Cable Preparation .................... 9 Hard Disk Installation ....................10 2.2.1 Hard Disk Compatibility List ................
  • Page 7 PTZ ..........................43 Zoom .......................... 44 Shortcut Toolbar ......................45 4.8.1 Network Stream Quality..................46 4.8.2 Preference ......................47 4.8.3 Pop-up Setup ...................... 47 4.8.4 Relay Setup ......................48 Configuration Menu ..................... 49 Record Setup ......................49 5.1.1 Continuous Record ..................... 50 5.1.1.1 Video Settings ....................
  • Page 8 5.5.1.2 Static IP Setup ..................64 5.5.1.3 PPPoE Setup ..................65 5.5.1.4 3G Setup ....................66 5.5.1.5 Bandwidth Limited ................66 5.5.2 HTTP Setup ......................67 5.5.3 DDNS Setup ......................67 5.5.4 NTP Setup ......................68 5.5.5 Mail Setup ......................69 5.5.6 FTP Setup ......................

  • Page 9: Introduction

    The model also supports RS-485 serial interface, 2 USB interfaces and 1 RJ45 (10/100/1000) Base-T Ethernet interface. Other than that, the EPHD16+U can be expanded up to 7 SATA devices (6 SATA HDDs and 1 eSATA), ensure the large capacity of the HD-SDI video recordings.
  • Page 10 EPHD16+U Universal DVR EPHD16+U System Diagram IR Remote *Currently Control Reserved Mouse / USB Memory Stick Internal 3.5" HDDs (Optional) Power eSATA HDD Expansion HD-SDI or Analog Camera 1~16 Line Level Supply (EDA450) Audio Out Network Call Alarm RS-485 Device...

  • Page 11: Features

    EPHD16+U Universal DVR 1.1 Features • 8CH Full HD (1080p) real-time recording and playback • 1080P, 720P, 960H, D1 real-time recording & playback • H.264 compression format for enhancing recording capacity and improving network image transmission speed • Multiple Monitors: Main monitor outputs(HDMI and VGA) / Call monitor outputs (CVBS) •...

  • Page 12: Packing List

    Note: 1. Equipment configurations and supplied accessories vary by country. Please consult your local EverFocus office or agents for more information. Please also keep the shipping carton for possible future use. 2. Contact the shipper if any items appear to have been damaged in the shipping process.

  • Page 13: Optional Accessories

    EPHD16+U Universal DVR 1.3 Optional Accessories Connect the EDA450 to the EPHD08+ for expanding the storage capacity. Please refer typo Figure 1-4, No. 3. EDA450 (eSATA Storage) The following items can be used to extend the cable length between the DVR and the camera.

  • Page 14: Front Panel

    EPHD16+U Universal DVR 1.5 Front Panel 10 11 12 13 14 15 No. Name Description The USB2.0 port for connecting to a mouse or external storage device. USB2.0 Ports (The upper USB port is currently reserved.) Status In Live mode, enter the System Information menu.
  • Page 15 EPHD16+U Universal DVR Freeze In Live mode, press to freeze the video display. Zoom In Live mode, press to zoom the display of a channel. Lock Press to logout or login. Select the full screen channel in live mode. Channel Button Select the full screen channel in playback.

  • Page 16: Rear Panel

    EPHD16+U Universal DVR 1.6 Rear Panel No. Name Description Connects to the 100-240 VAC~ power using the supplied Power Power Port Cord. eSATA Port Connects to an external eSATA storage device. (EDA450) Connect HD-SDI or analog cameras using coaxial cables. For coaxial Video Input cable requirements, please refer to 2.1 Coaxial Cable Preparation.

  • Page 17: Installation

    The standard RG-59 cables are originally designed for lower frequencies. However, with EverFocus’ HD-SDI technology, you can still use the standard RG-59 cable for distances over 100 m / 330 ft. The RG-59 cables with high quality and low loss allow distances up to 160 m / 520 ft.

  • Page 18: Hard Disk Installation

    EPHD16+U Universal DVR 2.2 Hard Disk Installation You can optionally install six 3.5” HDDs inside the DVR for recording videos. Make sure the DVR is power-off. Unscrew the two housing screws on the back panel of the DVR. Screw two HDD brackets on both sides of the HDDs using the Sliver Screws.
  • Page 19 EPHD16+U Universal DVR Connect the internal power cable to the HDD. Note: The internal power cable is connected to the Main board inside the DVR. The power cable features two connectors, which can be used to connect to two HDDs.

  • Page 20: Hard Disk Compatibility List

    EPHD16+U Universal DVR 2.2.1 Hard Disk Compatibility List Please use the hard disk models recommended in the list below to ensure your hard disks will be compatible. SATA Hard Disk Model Capacity Constellation ES.3 SATA3 ST4000NM0033 Constellation CS SED SATA3 T3000NC000...

  • Page 21: Rack Mount

    EPHD16+U Universal DVR 2.3 Rack Mount To install rack ears on the DVR: 1. Unscrew the four M3 (φ6.8) screws on both side of the DVR. 2. Use the supplied two rack ears and the above screws for rack mount installation on both side.

  • Page 22: Basic Connection

    EPHD16+U Universal DVR 2.4 Basic Connection The instructions below the figure describe the basic connection for the EPHD16+U. Power Supply HD-SDI or Analog Camera 1~16 Line Level Audio Out Network Main Line Level Main Mouse Monitor or USB Audio In 1~8...

  • Page 23: Cable Length Extension

    The maximum distance between camera and DVR can be extended by using optical fiber cable. You can optionally use EverFocus’ optical fiber transmitter / receiver, EHA-FTX and EHA-FRX, to extend the distance. Two modes are available for EverFocus’ transmitters and receivers: multi-mode and single-mode.

  • Page 24: Monitor Connection

    Monitor Connection Connect the monitor to the CVBS, HDMI or VGA port on the rear panel of the DVR. The EPHD16+U DVR provides 2 main monitor outputs with identical functionality - VGA and HDMI, and one call monitor output - CVBS.

  • Page 25: Alarm I / O

    EPHD16+U Universal DVR 2.4.3 Alarm I / O The DVR provides 16 alarm inputs and 4 alarm outputs. Please refer to the table below for PIN assignment. Alarm In: Alarm Out: Alarm Input Description ALM_IN1 – ALM_IN16 1-16 Alarm Input Contacts This DVR provides one alarm input per camera.

  • Page 26: Port

    EPHD16+U Universal DVR 2.4.4 RS-485 Port The RS-485 port, located on the rear panel of the DVR, can be used to connect to an RS-485 keyboard for controlling PTZ cameras or simply connect to a PTZ camera. For details on the RS-485 configurations on the DVR, please refer to 6.9.5 I/O Control.

  • Page 27: Checking The Dynamic Ip Address

    2.6 Checking the Dynamic IP Address You can look up the IP address and access the Web interface of the DVR using the IP Utility (IPU) program, which can be downloaded from EverFocus’ Website: http://www.everfocus.com/HQ/Support/DownloadCenter_p1.aspx. Please connect the DVR in the same LAN of your computer.
  • Page 28 EPHD16+U Universal DVR Right click the column to configure the setting. Click Apply Changes button to apply and save the settings. Note: Most networks uses DHCP to assign IP address, if you are unsure of your network settings, please consult your network administrators for configuration details.
  • Page 29 EPHD16+U Universal DVR 7. On the computer, click Start > Control Panel > System and Security > Action Center (click Change User Account Control Settings), the User Account Control Settings window appears. Adjust the slide bar to Never Notify and then click OK. Restart your computer if requested.

  • Page 30: Connecting The Dvr To The Network

    EPHD16+U Universal DVR Connecting the DVR to the Network There are three methods to connect the DVR to the network: Router or LAN Connection, Direct High‐Speed Connection and One‐to‐One Connection. For more information of the network, please refer to Appendix A. Network Overview.
  • Page 31 Once you have a straight through cable, plug one end into the LAN port on the back of  the recorder and the other into the router. Log into the EverFocus DVR menu and go to the Network Setting Menu.  To let the router automatically assign an address: ...
  • Page 32 EPHD16+U Universal DVR change the last number of the IP address. For example, if the IP address of the computer is 192.168.2.101, the DVR’s IP address should be 192.168.2.50. To access the DVR from a computer simply open Internet Explorer and in the address ...

  • Page 33: Direct High-Speed Connection

     the recorder and the other into the high speed modem. Log into the EverFocus DVR menu and go to the Network Setting Menu.  Input the Static IP address, the Subnet Mask, and the Gateway that you obtained from ...

  • Page 34: One-To-One Connection

     DVR and the other into the network card on the back of the computer. Log into the EverFocus DVR menu and go to the Network Setting Menu.  You must use the Static IP option for this type of connection.
  • Page 35 EPHD16+U Universal DVR Go to Start. Double-click on Control Panel.  Click Network and Sharing Center.  Click Local Area Connection. ...
  • Page 36 EPHD16+U Universal DVR Click Properties.  Click on Internet Protocol Version 4 (TCP/IPv4) and then click Properties. ...
  • Page 37 EPHD16+U Universal DVR Select Use the following IP address. Assign an IP address of 192.168.1.2, a Subnet  Mask of 255.255.255.0, and a Default Gateway of 192.168.1.1 and then click OK. Restart both of the computer and the DVR. ...

  • Page 38: Live Operations

    EPHD16+U Universal DVR Chapter 3. Live Operations In the live mode, you may monitor all channels of the DVR, listen to live audio from cameras, and configure the DVR. The DVR can support 4:3 and 16:9 aspect ratios of the screen layout. There is a...

  • Page 39: Status Icon Description In Live Mode

    EPHD16+U Universal DVR 4:3 Display: To bring up the Configuration Panel, you need to right-click the screen. Shortcut Toolbar Channel Panel Channel Status Panel Status Icon Description in Live Mode Icon Description Recording of a channel is activated. Live audio of a channel is activated.
  • Page 40 EPHD16+U Universal DVR The channel video-loss alarm of a channel has been triggered. USB device has been detected. DVD device has been detected. Network connection is available. Network connection is not available. Displays the current user. Displays the current disk space and usage. (The figure shows 99% of the disk space has been used, and 1% is available.).

  • Page 41: Main Menu Setup

    EPHD16+U Universal DVR Chapter 4. Main Menu Setup enter the main menu and set up a DVR, log-in account and user password are required. default password of the administrator is “11111111”. Please check the “Account Setup” for management of other log-in users.
  • Page 42 EPHD16+U Universal DVR There are icons within the configuration pane on the live mode to operate different features of the DVR. The configuration pane is always on the left or right side of the screen in the 16:9 mode and can to be evoked by right-click in the 4:3 mode.
  • Page 43 EPHD16+U Universal DVR Name Description Set the auto sequential menu. Set the backup menu to backup video data from DVR HDD. Set the configuration menu to access recording settings, event settings, camera settings, account settings, network settings, storage settings, system configuration, and information.

  • Page 44: Auto Sequential

    EPHD16+U Universal DVR 4.1 Auto Sequential Item Description Interval The time interval between each channel display. All Channels The DVR automatically switches between channels with designated interval. The DVR shows each channel in a single-split mode. Quad-Screen Division The DVR automatically switches between channels with designated interval.

  • Page 45: Backup

    EPHD16+U Universal DVR Backup User can backup recorded video data of a specified time frame. The DVR can backup video data to either direct-attached storage, such as DVR or USB drive, or remote folder of a PC. 4.2.1 Selection Item...

  • Page 46: Select Backup Device

    EPHD16+U Universal DVR 4.2.2 Select Backup Device Item Description Select target device of backup (USB/DVD-RW/remote folder). Backup Device The status of target backup device. Status The available space in the target backup device. (not available for Free Space remote folder backup).

  • Page 47: Configuration

    EPHD16+U Universal DVR 4.3 Configuration Click the Configure icon to bring up the configuration menu, recording settings, event settings, camera settings, account settings, network settings, storage settings, system configuration, and information. Please refer to Chapter 5 for detail. 4.4 Time Search You can search the specific time of recorded data for playing back.
  • Page 48 EPHD16+U Universal DVR Playback Mode: Remote Control Button: Button Description ENTER/ MODE Switch to full screen or multi-split display. Turn on/off PAUSE. MENU / PLAY Playback at normal speed. Playback at slower speed. The speed will be slowed to 1/2, 1/4, / SLOW 1/8 playback speed, by pressing of the button till the slowest speed.

  • Page 49: System Logs

    EPHD16+U Universal DVR Mouse Operation: Item Description Play Pause Fast rewind, speed 4x, 8x, 16x, 32x Fast forward, speed 4x, 8x, 16x, 32x Slow playback, speed 1/2x, 1/4x, 1/8x Step playback Zoom-in display, 2x ~ 8x digital zoom Full screen display...

  • Page 50: Search Criteria

    EPHD16+U Universal DVR Note: If the hard disk is not installed or has not started recording, the DVR will produce the event list, but the user cannot playback the video of a specific event by clicking the event. Item Description Set the conditions for the event search.

  • Page 51: Ptz

    EPHD16+U Universal DVR 4.6 PTZ You can set up the PTZ camera settings. Enter the PTZ configuration page, and the PTZ control panel displays the camera PTZ setting. There is a red cross on the center of the screen. Move the mouse to the Red Cross and hold down the left mouse button to the preferred location of the screen.

  • Page 52: Zoom

    EPHD16+U Universal DVR 4.7 Zoom In the digital zoom mode, users may use the mouse to move the red rectangle of the zoom area. You can drag the small window. Item Description Zoom in the area specified by the red rectangle.

  • Page 53: Shortcut Toolbar

    Relays. The user can control the behavior of the relay on the DVR. Note: 1. The recording, full screen, preference, network video quality functions are only allowed for the remote use. 2. The screenshot, recording, options function are only available in "EverFocus DVRAX from EverFocus Inc" use; IE 7/8/9 do NOT support.

  • Page 54: Network Stream Quality

    EPHD16+U Universal DVR 4.8.1 Network Stream Quality Item Description Low Quality Insufficient bandwidth used for one second about running 1 ~ 2 FPS. Static Image Low Quality According to the DVR recording settings. High Quality Insufficient bandwidth to use for one second about running 1 ~ 2 FPS.

  • Page 55: Preference

    EPHD16+U Universal DVR 4.8.2 Preference You can change the PC side screenshots, or video storage path. 4.8.3 Pop-up Setup Item Description Event Pop-up window displays the channel status. Display time, HDD status, channel information, and channel border.

  • Page 56: Relay Setup

    EPHD16+U Universal DVR 4.8.4 Relay Setup Item Description Relay 1 ~ 4 Relay J Series x1, N Series x2, B Series x4. Functional Turn On / Off or Auto.

  • Page 57: Configuration Menu

    EPHD16+U Universal DVR Chapter 5. Configuration Menu 5.1 Record Setup Item Description Record Mode Continuous Record / Schedule Record / Stop Record.

  • Page 58: Continuous Record

    EPHD16+U Universal DVR 5.1.1 Continuous Record Item Description Video Click icon, it will go to the video setting menu of this channel (below). In settings menu, press to save, press to go back to the original video settings menu Record Enable / Disable recording for this channel.

  • Page 59: Video Settings

    EPHD16+U Universal DVR 5.1.1.1 Video Settings Item Description Sharpness Adjust sharpness from 0 to 255. Brightness Adjust brightness from 0 to 255. Adjust contrast from 0 to 255. Contrast Adjust saturation from 0 to 255. Saturation Adjust hue from 0 to 255.

  • Page 60: Video Settings

    EPHD16+U Universal DVR 5.1.1.2 Video Settings Item Description Record Enable / Disable recording of a channel. Resolution Recording resolution selection. *Note Select recording frame rate from 1 to 30. Quality Recording quality from 10 to 100. The larger number means the better quality.

  • Page 61: Schedule Recording

    EPHD16+U Universal DVR 5.1.2 Schedule Recording You can configure recording time by days of a week and hour in this page. With the A, B, C, D four settings, users can set different recording scheme according to different configuration needs. In the day and time grid, select the schedule time zone, and then press one of the A, B, C, D buttons to configure the video settings.

  • Page 62: Holiday Configuration

    EPHD16+U Universal DVR 5.1.2.2 Holiday Configuration The number of holiday is up to 50. When it is on the specified holidays, the DVR will start recording according to holiday configuration. Since holidays are different by different countries and regions, users can setup holidays according to user needs.

  • Page 63: Configuration

    EPHD16+U Universal DVR 5.2.1.1 Configuration Item Description Enable Enable / Disable video loss detection function. 5.2.1.2 Event Handling Item Description Check to log events when the video loss event happens. Event Record Select channel for event recording when event occurs. The video setup corresponds to the "Configuration →...

  • Page 64: Receiver Setup

    EPHD16+U Universal DVR 5.2.1.3 Receiver Setup Item Description Enable Specify whether the DVR sends e-mail notice to notify users when an event occurs. Admin / Users Specify the receiver of e-mail notices. 5.2.2 Motion Detection...

  • Page 65: Configuration

    EPHD16+U Universal DVR 5.2.2.1 Configuration Item Description Enable Enable / Disable the motion detection function of this channel. Sensitivity The sensitivity value is from 0 to 100. The higher value means higher sensitivity. Motion Area Enter to setup motion detection area.

  • Page 66: Sensor

    EPHD16+U Universal DVR 5.2.3 Sensor Each sensor name can be modified and can remotely enter various languages. 5.2.3.1 Configuration Item Description Enable Enable/Disable sensor. N.C: The sensor has not been triggered. When connected, sensor will Polarity be turned on. N.O: The sensor has been triggered. When connected, sensor status will be turned off.

  • Page 67: System

    EPHD16+U Universal DVR 5.2.4 System When the system event occurs, give a notice or warning according to the settings of relay, buzzer, and receiver. If the buzzer box is checked, the buzzer continually beeps for only errors related to the video (EX: The hard drives can’t write or the DVR is not installed with the hard drive).

  • Page 68: Camera Setup

    EPHD16+U Universal DVR 5.3 Camera Setup Item Description Mask Check the box to Enable/Disable the mask function for the camera in the LIVE mode Name Channel name. Timestamp Click on the black screen to set position of the timestamp. 5.3.1...

  • Page 69: Account Setup

    EPHD16+U Universal DVR Item Description Enable Click the box to Enable/Disable PTZ function. Protocol Set up the protocol of PTZ cam. The supported protocols are: PELCO-D, PELCO-P, SAMSUNG, SAMSUNG II, and LG-MultixE. PTZ ID Set up PTZ ID. The valid ID value is from 0 to 255.

  • Page 70: Other Users

    EPHD16+U Universal DVR 5.4.2 Other Users Item Description Enable Check to activate the user’s account. Expire Set the expiration date of the user account. Name Set up the username. Password Set up the password. The password can be mixed of letters and numbers and is case-sensitive.

  • Page 71: Network Setup

    EPHD16+U Universal DVR Please note that you must check the box to enable the local and remote permission to be able to use the functions. 5.5 Network Setup Item Description DHCP The DVR retrieves from a DHCP server automatically. Static IP Set up a Static IP address of the DVR.

  • Page 72: Networking Setup

    EPHD16+U Universal DVR 5.5.1 Networking Setup There are three ways to connect to the network. 5.5.1.1 DHCP Setup When DHCP is selected, IP address will be assigned by DHCP server automatically. Notice: The IP address shown in this page is not the IP address obtained from the DHCP server.

  • Page 73: Pppoe Setup

    EPHD16+U Universal DVR Item Description Enable Enable / Disable Static IP function. Enter the static IP address provided by ISP. Subnet Mask Enter IP address of Subnet Mask provided by ISP. Gateway Enter IP address of the Gateway provided by ISP.

  • Page 74: Setup

    EPHD16+U Universal DVR 5.5.1.4 3G Setup Using the USB 3G dongle to access the network. PS: only specific chip of 3G dongle is supported and the 3G dial-up features may not be compatible to some ISPs. Item Description Enable Enable / Disable 3G function.

  • Page 75: Http Setup

    EPHD16+U Universal DVR 5.5.2 HTTP Setup Item Description Enable Check to enable HTTP server. Users can remotely access into the DVR over the network if the HTTP function is activated. Port Enter a valid port value from 1 up to 65535. The default value is 80.

  • Page 76: Ntp Setup

    EPHD16+U Universal DVR When using this DDNS service, the system will automatically bring up to C + DVR Mac Address last six yards at the beginning of a host site, such as the Mac end of the six yards of FD5CCD, and then bring out the host site at CFD5CCD.i-dvr.net or CFD5CCD.ez-dns.com.

  • Page 77: Mail Setup

    EPHD16+U Universal DVR 5.5.5 Mail Setup The Mail Setup tab controls the email-sending configuration when the DVR needs to send e-mail to specified users. Item Description Enable Check the box to enable/disable E-mail Notification function SMTP Server Set up SMTP Server name and port User Enter to set up the username.

  • Page 78: Ftp Setup

    EPHD16+U Universal DVR 5.5.6 FTP Setup Item Description Enable Check the box to enable/disable FTP function. Server Set up FTP Server name and port. User Enter to set up the username. Password Enter to set up the password. Directory Upload FTP directory path.

  • Page 79: Storage Setup

    EPHD16+U Universal DVR 5.6 Storage Setup 5.6.1 HDD Setup Item Description Video Preservation Setup the video preservation period. Recorded video will be (Hours) deleted automatically after expiry of preservation period. Model Display HDD model. Status Display HDD status (Recording / Error).

  • Page 80: Usb Flash Device Setup

    EPHD16+U Universal DVR 5.6.2 USB Flash Device Setup Item Description Model Display USB flash drive model. Free/Capacity Display USB flash drive capacity (Free / Capacity). 5.6.3 USB Flash Device Setup Item Description Model Display DVR-RW model. Media Type Display disk type.

  • Page 81: Auto Lock

    EPHD16+U Universal DVR Item Description The name of DVR to be shown while users login from remote site. DVR Name Language Specify the OSD language. Video Format Specify the format of video signal (auto-detect, NTSC, PAL). The Detection configuration requires DVR reboot to take effect.

  • Page 82: Date/Time Setup

    EPHD16+U Universal DVR 5.7.3 Date/Time Setup Item Description Hour Format 12 HOURS / 24 HOURS. Date Format MM-DD-YY / DD-MM-YY / YY-MM-DD. 5.7.3.1 Time Zone Item Description Time Zone Setup Set up the time zone of the DVR, from GMT – 13~ GMT+ 13.

  • Page 83: Change Date And Time

    EPHD16+U Universal DVR Item Description Beginning Setup the beginning time of Daylight Saving Time. Ending Setup the ending time of Daylight Saving Time. 5.7.3.3 Change Date and Time Set up date and time of the DVR. 5.7.4 Monitor Setup Users have to decide which one is the main screen, which is the second screen. There are three configurations.
  • Page 84 EPHD16+U Universal DVR Item Description 1 / 2 Set the main screen (1) the second screen (2) screen display setup menu. Resolution Select screen resolution. Border Color Set the color of border. Luminance Set brightness, from 0 to 100. Contract Set screen display color contrast, from 0 to 100.

  • Page 85: Input Setup

    EPHD16+U Universal DVR 5.7.5 Input Setup The Input Setup allows users’ setup input device (Key Tone, Remote control, Panel, Mouse, Keyboard, Touch screen). Item Description Key Tone Enable / Disable Key Tone. 5.7.5.1 Remote Control Setup Item Description Enable Enable / Disable remote control.

  • Page 86: Panel Setup

    EPHD16+U Universal DVR 5.7.5.2 Panel Setup Item Description Test Enable / Disable panel button test function. Press Key Display information of the pressed key. 5.7.5.3 Panel Setup Item Description Setup the mouse cursor speed. The right side of the slider means Speed the faster mouse speed.

  • Page 87: Ptz Keyboard Setup

    EPHD16+U Universal DVR 5.7.5.4 PTZ Keyboard Setup Item Description RS-485 ID RS-485 ID, valid values range from 1 to 64. RS-485 Baud rate RS-485 Baud rate from 2400, 4800, 9600, 19200. Keyboard Select PTZ Keyboard. Test Enable / Disable keyboard test function.

  • Page 88: Utility Setup

    EPHD16+U Universal DVR 5.7.6 Utility Setup Item Description Export Configuration Export DVR configuration to a USB flash drive or a remote PC. Import Configuration Import configuration from a USB flash drive or a remote PC to DVR. Reset Configuration Reset system configuration.

  • Page 89: System Information

    EPHD16+U Universal DVR 5.8 System Information 5.8.1 DVR Information Item Description Model Displays DVR model name and video type. Version Displays DVR firmware version. 5.8.2 Network Information Item Description Displays the DVR IP address. If there is no network connection, it will show "Network is not connected.

  • Page 90: Information

    EPHD16+U Universal DVR 5.8.4 S.M.A.R.T Information...

  • Page 91: Remote Access By The Ie Browser Or Software

    Windows 7. 6.1 IE Browser Connection EverFocus provides a useful tool, the IP Utility (IPU) program, for you to look up the IP address and quickly access the Web interface of the DVR with the IE browser. To download the IPU program, please go to: http://www.everfocus.com/HQ/Support/DownloadCenter_p1.aspx.
  • Page 92 EPHD16+U Universal DVR b. Type the Username and Password. Click the OK button, the status of the selected camera will display Login. Note: 3. The default user ID is admin and the default password is 11111111. If you select more than one DVRs that have the same user ID / password, you will be able to log in several DVRs at once.
  • Page 93 EPHD16+U Universal DVR 7. On the computer, click Start > Control Panel > System and Security > Action Center (click Change User Account Control Settings), the User Account Control Settings window appears. Adjust the slide bar to Never Notify and then click OK. Restart your computer if requested.

  • Page 94: Software Connection

    1. Open any browser except the IE browser, and enter the IP address of the DVR on the address bar. 2. You will be asked to download the EverFocus DVR software and click the correct application which supports your operating system. 3. After the download, the following window will pop up; just click “Run” to run the software.
  • Page 95 EPHD16+U Universal DVR 4. When the window shows up as below, enter the IP address in the Host field, select Port “80”, enter “admin” and “11111111” in the User and Password fields respectively. 5. Click Connect to successfully access to the Web interface.

  • Page 96: Specifications

    System Control Front Panel Buttons, Mouse, Web UI, IR Remote Control Simultaneous Live, Recording, Playback, Archive and Remote Pentaplex Operation Viewing PTZ Protocol Supported EverFocus, Pelco D, Pelco P, Samsung, Transparent Video Video Compression H.264 Format Video Format NTSC / PAL (auto detected by system)
  • Page 97 Remote live view and playback support on the IE web browsers Remote View Support and EverFocus DVR software Integrated with EverFocus’ Genie XMS and PowerVideo Plus Live view on mobile browsers Mobile View Support Integrated with EverFocus’ Mobile applications MobileFocus...
  • Page 98 (firewall) 1. EverFocus’ Surveillance System: Genie XMS Other Remote Power Video Plus (Windows AP) Application 2. EverFocus’ mobile app: MobileFocus for iOS and Android devices MobileFocusHD for iPad Note: Known VGA card that support DirectX9.0 currently: NVIDIA: GeForce FXseries, GeForce 6series, GeForce 7series, GeForce 8series, GeForce 9series,GeForce 200series, etc.

  • Page 99: Appendix A: Ir Remote Control

    EPHD16+U Universal DVR Appendix Appendix E: IR Remote Control To use the remote controller, please set up the IR ID for the DVR on the OSD setting menu. Please follow the steps below. 1. Go to Configure > System Setup > Input Setup > IR Setup. You can refer to 5.7.5.1 Remote Control Setup.
  • Page 100 TEL: +91 22 6128 8700 FAX: +91 22 6128 8705 www.everfocus.in sales@everfocus.in Ihr EverFocus Produkt wurde entwickelt Your EverFocus product is designed and und hergestellt mit qualitativ manufactured with high quality materials hochwertigen Materialien und and components which can be recycled Komponenten, die recycelt und wieder and reused.

Table of Contents