Moving Tracks; Naming A Track Or Md - Sony MDS-JB930 Operating Instructions Manual

Moving Tracks

This function lets you change the or der of any track.
Example: Moving the second track after the
third track
AAA BBB CCC
1 2 3
AAA CCC
1 2
After you move a track, the tracks ar
automatically .
1
While the deck is stopped, playing, or paused,
press MENU/NO.
"Edit Menu" appears in the display .
2
Turn AMS (or press ./> repeatedly) until
"Move ?" appears, then press AMS or YES.
3
Turn AMS (or press ./> repeatedly) until the
number of the track to be moved appears, then
press AMS or YES.
4
Turn AMS (or press ./> repeatedly) until the
new track position appears, then press AMS or
YES.
"Complete!!" appears for a few seconds and the track
is moved. The deck starts to play the moved track.
To cancel the operation
Press MENU/NO or x.
z
You can undo the track move
For details, see "Undoing the Last Edit" on page 42.
38
GB
DDD
4
BBB DDD
3 4
e renumber ed

Naming a Track or MD

You can enter a name for a r ecor ded MD as well as for
individual tracks. Names can consist of upper case and
lower case letters, numbers, and symbols. A total number
of 1,700 characters can be stor
MD.
MENU/NO
DISPLAY/CHAR
Z
NAME
CHAR
H
. >
m/M
m M
X . >
Note
If you name a track while it is being recorded, be sure to finish
the naming operation before the track ends. If the track ends
before you finish, the entered character data will be discarded
and the track will remain unnamed. Also, you can't name tracks
while the deck is recording over existing material.
ed for all the names on the
AMS YES
A
CLEAR
m/M
MENU/NO
` / 1
YES
Letter/number
buttons
CLEAR
NUM
X x
./>
z