Sony MDS-JB930 Operating Instructions Manual page 32

Tips for Recording From MDs to Tape
Pausing after each track (Auto Pause)
You can set the MD deck so that it pauses after each track
to give you time to locate the next track to be recorded.
1
While the deck is stopped, press MENU/NO twice.
"Setup Menu" appears in the display.
2
Turn AMS until "Auto Off" appears, then press
AMS or YES.
3
Turn AMS to select the setting, then press AMS or
YES.
To Select
Turn on Auto Pause Auto Pause
Turn off Auto Pause Auto Off (factory setting)
4
Press MENU/NO.
To resume play after pausing
Press H.
z
You can use the remote to turn Auto Pause on or off Z
While the deck is stopped, press A.SPACE repeatedly until "Auto
Pause" or "Auto Off" appears in the display.
Note
If you turn off the deck or disconnect the mains lead, the deck
will store the last setting ("Auto Pause" or "Auto Off") and recall
it the next time you turn on the deck.
32
GB