Erasing A Track Mark; Labeling Recordings; Moving Recorded Tracks - Sony MZ-R50 Operating Instructions Manual

Erasing a track mark

See the illustrations in the Japanese text
(page 26).
When you record with analog (line) input,
unnecessary track marks may be recorded.
You can erase a track mark to combine the
tracks before and after the track mark.
1 While playing the track with the track
mark you want to erase, press P to
pause.
Find the track mark by pressing =
2
slightly.
"00:00" flashes in the display.
Press the T MARK button to erase the
3
mark.
The track mark is erased and the two
tracks are combined. The number of
the newly combined track will be that
of the first track and the succeeding
tracks will be renumbered.

Moving recorded tracks

See the illustrations in the Japanese text
(page 27).
You can change the order of the recorded
tracks.
1 While playing the track you want to
move, keep pressing ( and press the
TITLE/ENTER button. The recorder
plays the selected track repeatedly.
Rotate the vertical jog dial to select the
2
new track position.
3 Press the TITLE/ENTER button.
Moving is completed and the recorder
plays the moved track.
Tip
You can also move the track by pressing the
jog dial in step 3.

Labeling recordings

See the illustration in the Japanese text
(page 28).
You can label the MDs and tracks you
recorded with letters, numbers, and marks.
Each label can be made up of up to 200
characters, and each MD can include up to
1700 characters.
To label a track, play the track you
1
want to label.
To label an MD, insert the recordable
MD you want to label.
If an MD is already inserted, press p
to stop.
2 Press the TITLE/ENTER button.
When playing a track, the recorder
plays the track repeatedly.
3 Rotate the vertical jog dial to select a
character, and press the jog dial to
enter the selected character.
Press ( to select the first character of
capital letters, small letters, marks, and
numbers quickly.
Press =/+ to move the cursor to
left or right.
Press the END SEARCH button for a
space.
Press the ERASE button to delete a
character.
Press p to stop labeling.
* To use Katakana, press VOLUME
＋/− to change the display as follows:
「ア」→「カ」→「サ」→「タ」
4 Repeat step 3 until you have entered
all the characters for the label.
5 Press the TITLE/ENTER button to
finish labeling.
To cancel labeling, Press p.
57