Sony MDS-JB930 Operating Instructions Manual page 11

1 234
0 10
wj wh wg wf wd
qs INPUT selector (18, 20, 21, 55)
Use to select the input jack (or connector) of the
programme source to be recorded.
qd REC LEVEL control (20)
Turn to adjust the recording level.
qf REC z button (19, 20, 22, 25, 42)
Press to record on the MD, monitor the input signal, or
mark track numbers.
qg x button (19, 26, 46)
Press to stop play or recording, or cancel the selected
operation.
qh X button (7, 19, 25, 26)
Press to pause play or recording. Press again to
resume play or recording.
qj H button (7, 19, 25-27, 29, 30, 46)
Press to start play.
qk EJECT A button (19, 20, 26)
Press to eject the MD.
ql m/M buttons (8, 28, 30, 31, 33, 35, 36, 39)
Press to locate a portion within a track, change the
contents of a programme, or change the input
character.
w; MD insertion slot (18, 26)
Insert the MD as illustrated below.
With the labelled
side up
With the arrow
pointing towards
the deck
5
wswa
6 8
7
w; ql
wa DISPLAY/CHAR button (14, 15, 20, 30, 39)
• Press when the deck is stopped to display disc
information or the contents of a programme.
• Press during recording to display information on the
track being recorded.
• Press during play to display information on the
current track.
• Press during recording pause to adjust the recording
level.
• Press while editing an MD to select the type of
characters to be input.
ws SCROLL button (16)
Press to scroll the name of a track or MD.
wd PLAY MODE button (29, 30, 46)
Press to select Shuffle Play or Programme Play.
wf KEYBOARD jack (49)
Connect a keyboard to this jack.
wg PHONE LEVEL control (26)
Turn to adjust the volume of the headphones.
wh PHONES jack (26)
Connect headphones to this jack.
wj TIMER selector (46)
Use to set the timer for recording (REC) or playing
(PLAY). Set to OFF to turn off the timer.
9 0 qa qs qd qf
–
A
qk qj qh qg
+
11
GB