Other Functions; Changing The Pitch (Pitch Control Function) - Sony MDS-JB930 Operating Instructions Manual

Other
Functions
This chapter explains other useful
functions that are available on the MD
deck.
Changing the Pitch
(Pitch Control Function)
You can change the MD playback speed (pitch). The tone
rises at higher pitches, and falls at lower pitches. When
you've set the pitch to a value other than the factory
setting, the PITCH CONTROL button lights amber during
play.
PITCH CONTROL
Setting the pitch automatically in steps
(Auto Step Control Function)
You can increase the pitch by up to 2 steps
pitch by up to 48 steps.
One octave equals 12 steps.
*
1
While the deck is playing, press PITCH CONTROL
repeatedly until "Pitch" appears in the display.
2
Turn AMS until the desired step value appears.
To recall the factory setting
Press CLEAR while setting the value.
Notes
• When you change the step value, the playback sound drops out
momentarily.
• The step value returns to "0" (factory setting) when you turn
off the deck or eject the MD.
• When a dot (.) appears to the right of the step value in the pitch
display, this indicates that you have performed fine adjustment
(see the next page) and the pitch value is between steps. (The
step and fine control values are linked.)
AMS
Z
*
or lower the
43
GB