Editing Recorded Mds - Sony MDS-JB930 Operating Instructions Manual

Editing
Recorded MDs
This chapter explains how to edit the
tracks that have been recorded on an
MD.
MENU/NO
Brief descriptions of buttons and control
used to edit MDs
The buttons and the contr ol below ar e used to erase,
divide, move, or combine tracks on the MD.
Note
The operation of these buttons and the control is different when
naming a track or MD. For details, see "Naming a Track or MD"
on page 38.
MENU/NO button: While the deck is stopped, playing,
or paused, pr ess to edit tracks. While editing, pr ess to
cancel editing.
AMS control: Turn to select an editing operation or track
number, then pr ess to enter your selection. Y ou can also
use the contr ol to specify points in a track for erasur
track division.
YES button: Press this button instead of the AMS contr
to enter a selection.
m/M buttons: Press to specify the unit (minute,
second, or frame) by which the MD is advanced when the
AMS control is tur ned. Y ou can also use these buttons to
locate the end point of the portion to be erased.
For further details on the function of each button and
control, see the sections on editing operations.
AMS YES
A
m/M
e or
ol
33
GB