Sony MDS-JB930 Operating Instructions Manual page 16

Using the Display
z
You can check the remaining time
Press TIME. Each press of the button changes the display as
follows:
Track number and elapsed time of the
current track (default display)
Track number and remaining time of the
current track
Remaining time of all recorded tracks
z
You can check the track name at any time while playing
Press SCROLL.
The track name appears and scrolls. While the track name is
scrolling, press the button again to pause scrolling, and again to
continue scrolling.
16
GB
Press
Press
Press
Checking the pitch control value
Press PITCH CONTROL repeatedly to change the
display.
Each press of the button changes the display as follows:
Track number and elapsed time of the
current track (default display during play)
*
Pitch value in steps
*
Fine control value
* If you want to change the pitch, see "Changing the Pitch" on pages
43 and 44.
Displaying the recorded date Z
When the internal clock has been set, the deck
automatically records the recording date and time of all
recordings. You can then check the recorded date and
time of a track.
1
Press ./> or number buttons to locate the
track you want to check.
2
Press DATE RECORDED.
"No Date" appears if the internal clock has not been
set or the track was recorded on another MD deck
without a date and time stamp function.
Press
Press
Press