Playing Mds; Playing An Md - Sony MDS-JB930 Operating Instructions Manual

Minidisc deck
Hide thumbs Also See for MDS-JB930:
Table of Contents

Advertisement

Playing MDs

This chapter explains the various
ways to play MDs.
26
GB

Playing an MD

The operations for normal play are explained below.
`/1
1
Turn on the amplifier and select MD on the
amplifier.
2
Press ~/1 to turn on the deck.
The STANDBY indicator turns off.
3
Insert an MD.
4
If necessary, turn AMS clockwise (or press >
repeatedly) to locate the track you want to start
playing from.
If you want to play from the first track, go to step 5.
5
Press H.
The deck starts to play.
6
Adjust the volume on the amplifier.
Operations you may want to do during play
To
Press or turn
Stop play
x
Pause play
X
Resume play after pausing
H or X
Locate a succeeding track
AMS clockwise (or press >
repeatedly)
Locate the beginning of the
AMS counterclockwise (or press
current track or a preceding
. repeatedly)
track
Eject the MD
EJECT A after stopping play
Adjust the analog output
REC LEVEL/ANALOG OUT
*
LEVEL +/– repeatedly
level
(between –20.0 dB and
0.0 dB) Z
When you eject the MD or turn off the deck, the output level is reset
*
to the factory setting (0.0 dB).
z
To use headphones
Connect them to PHONES jack. Turn PHONE LEVEL (or press
REC LEVEL/ANALOG OUT LEVEL +/– repeatedly) to adjust
the volume.
AMS
A
EJECT A
H
X x

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents