Sony MDS-JB930 Operating Instructions Manual page 40

Naming a Track or MD
Naming a track or MD using the remote Z
1
Press NAME while the deck is in one of the
operating statuses listed below, depending on
what you want to name:
To name Press while the deck is
A track Playing, paused, recording, or stopped with
the track number displayed
The MD Stopped with no track number displayed
A flashing cursor appears in the display .
2
Select the character type.
To select Press
Uppercase letters CHAR repeatedly until "Selected
AB" appears in the display
Lowercase letters CHAR repeatedly until "Selected
ab" appears in the display
Numbers NUM repeatedly until "Selected
12" appears in the display
3
Enter a character.
If you've selected uppercase or lowercase letters
1 Press the cor responding letter/number button
repeatedly until the character to be enter
Or, press the button once and pr ess ./>
repeatedly .
To select symbols, pr ess . repeatedly while "A"
is flashing.
2 Press M.
The flashing character is enter ed and lights
continuously and the cursor shifts to the right.
If you've selected numbers
Press the cor responding number button.
The number is enter ed and the cursor shifts to the
right.
40
GB
4
Repeat steps 2 and 3 to enter the rest of the name.
To change a character
Press m/M repeatedly until the character to be
changed flashes, pr ess CLEAR to erase the character ,
then r epeat steps 2 and 3.
5
Press NAME.
The whole name appears in the display .
To cancel the operation
Press MENU/NO or x.
z
You can undo the naming of a track or MD
For details, see "Undoing the Last Edit" on page 42.
Copying a track or disc name
You can copy an existing track or disc name and use it to
name another track on the same disc or the disc itself.
1
While the deck is stopped, playing, or paused,
press MENU/NO.
"Edit Menu" appears in the display .
2
Turn AMS (or press ./> repeatedly) until
"Name ?" appears, then press AMS or YES.
3
Turn AMS (or press ./> repeatedly) until "Nm
ed flashes.
Copy ?" appears, then press AMS or YES.
4
Turn AMS (or press ./> repeatedly) until the
number of the track (when copying the track
name) or "Disc" (when copying the disc name)
flashes, then press AMS or YES to copy the selected
name.
When "No Name" appears in the display
The selected track or disc has no name.
5
Turn AMS (or press ./> repeatedly) until the
number of the track (when naming a track) or
"Disc" (when naming a disc) flashes, then press
AMS or YES to enter the copied name.
"Complete!!" appears for a few seconds and the name
is copied.
To cancel the operation
Press MENU/NO or x.