Panasonic MDF-DU702VH Service Manual page 72

⑬
Insert the valve pipe from the back and secure it with the
mounting plate.
Bend the valve tip downward at 90 degree.
After inserting the gas pipe, fill the gap with silicon.
When the cover is attached, the tip of the valve pipe does not
interfere with the cover.
⑭ Fix the solenoid valve cover to the position shown in the figure with 2
truss tapping screws M4x12.
⑮
Cover the backup cover so that the various harnesses are not
caught in, and fix the four places with screws.
connect to harness
insert hole for
Fig.13-3
Fig.14-1
Fig.15-1
-69-
Fig.13-2
Fig.13-1
insert hole for gas tube
View of side
chamber
Foaming
cover
Foaming
securing clearance