Operation Setup Data - Panasonic MDF-DU702VH Service Manual

（Operation Setup Data , Other Setting）
Move to Version Up display
Screen Capture

 Demo Mode
 Self-diagnosis Function
 FAN Alarm
Move to Setup Data display
USB memory data can be import and export
Import data: setting data
Export data: daily information

・Confirm the connection of USB memory
・If it is not connected, message;
・The communication carry out by Setup Data
・If communication is failure, "Communication Failure"
・If communication is success, the saved setting data
・During communication and output, wheel appear in
the screen.
・If error occurs during output, depending on any
・When the output complete, "Export complete" is
※ If the previous saved setting data exit in USB

・Confirm the existence of file in predefined folder of
the USB memory.
･If file is not existence or CRC does not match, "File
not found." is displayed in "Notice" screen and the
process end.
･If file is existence, "Yes" is displayed in confirm
screen A.
And if "Yes" is selected, the communication is carried
out by SetupData command wright request （0x91）
and saved setting date.is sent.
The setting data is upgraded to saved setting value of
LCD control
During communication, wheel appears in the screen.
If the communication is successful, "Complete" is
displayed in Result box.
If the communication is failure, "Error" screen is
displayed
-24-
Data Export
disconnected" is displayed in "Notice screen".
command read request（0x90）.(By Data command
read request（0xFF）,the communication is
temporary halt.)
is displayed .
+ LCD control value output to USB memory. by BIN
format
situations, warning message is displayed and the
process break.
displayed in "Result" box.
memory, the data is overwritten.
Data Import
"
USB memory is