SL2100
Pressing the Cursor key Up or Down will scroll between the menus.
S
8 WHAT THE SOFTKEY DISPLAY PROMPTS MEAN
ECTION
(This Feature is available for IP Multiline Terminal Only.)
When using a display telephone in programming mode, various Softkey options are displayed. These
keys will allow you to easily select, scan, or move through the programs.
If you press this Soft-
key ...
back
select
- 1
+ 1
S
9 PROGRAMMING YOUR SYSTEM
ECTION
This sections describes the programs used to connect the NEC SL2100 to a data network and to
configure the VoIP functions.
5-6
_
Program Mode
Base Service OP1
_
Program Mode
Hard Mtnance
Table 5-4 Softkey Display Prompts
Softkey Display Prompts
Go back one step in the program display.
You can press Cursor Key (UP) or Cursor Key (Down) to scroll forward or backward through a
list of programs.
Scroll down through the available programs.
Scroll up through the available programs.
Select the currently displayed program.
Move the cursor to the left.
Move the cursor to the right.
Move back through the available program options.
Move forward through the available program options.
OP2
The system will ...
ISSUE 1.0
PROGRAMMING