NEC Sl2100 Networking Manual page 150
Hide thumbs
Also See for Sl2100:
- Features and specifications manual (978 pages) ,
- Programming manual (678 pages) ,
- Hardware manual (218 pages)
Table of Contents
Advertisement
SL2100
Program
Program Name
Number
84-19-69
SIP Extension CODEC Informa-
tion Basic Setup – Initial Jitter
Buffer for Video
84-19-70
SIP Extension CODEC Informa-
tion Basic Setup – Maximum
Jitter Buffer for Video
2.2.6 SIP Extension Basic Information Setup
Program
Program Name
Number
84-20-01
SIP Extension Basic Informa-
tion Setup – Registrar/Proxy
Port
84-20-02
SIP Extension Basic Informa-
tion Setup – Session Timer Val-
ue
84-20-03
SIP Extension Basic Informa-
tion Setup – Minimum Session
Timer Value
84-20-04
SIP Extension Basic Informa-
tion Setup – Called Party Info
84-20-05
SIP Extension Basic Informa-
tion Setup – Expire Value of In-
vite
84-20-06
Expire Value of Invite (send)
2.2.7 IP Phone Configuration
Program
Program Name
Number
15-05-01
IP Telephone Terminal Basic
Data Setup – Terminal Type
10-6
Description/
Comments
This setup specifies the
0 ~ 1000 (ms)
initial value of jitter buffer
Default is 140
for the video stream.
This value must be
smaller than the value of
the maximum jitter buffer
and be bigger than the
value of the minimum jit-
ter buffer.
This setup specifies the
0 ~ 1000 (ms)
maximum value of jitter
Default is 210
buffer for the video
stream. It is used only
when "67-Jitter Buffer
Mode for video" is
1:Fixed.
This value must be big-
ger than the value of the
minimum jitter buffer.
Description/
Comments
Define SIP station Proxy
1~65535
Port.
Default is 5070
Define the periodic re-
0~65535
fresh time that allows
Default is 180
both user agents and
proxies to determine if
the SIP session is still
active.
Define to convey the
0~65535
minimum allowed value
Default is 180
for the SIP session timer.
Define the SIP Extension
0 = Request URI
presented Caller ID infor-
1 = To Header
mation.
Default is 0
Define the time out re-
0~256 seconds
sponse value for SIP in-
Default is 180
vite.
The expiration time is set
1~3600 seconds
for the Invite message.
Default is 180
Description/
Comments
Review the type protocol
0 = NGT
support by the IP Phone.
1 = H.323
Viewing Only – No
2 = SIP
changes permitted.
3 = MEGACO
4 = SIP-MLT
READ ONLY
Default = 3
Assigned Data
1
Assigned Data
1
Assigned Data
1
IP Single Line Telephone
ISSUE 1.0
2
3
2
3
X
X
X
X
X
X
2
3
X
Hide quick links:
Advertisement
Table of Contents
