NEC Sl2100 Networking Manual page 132

SL2100
Program Program Name
Number
15-05-45 IP Telephone Terminal
Basic Data Setup –
NAT Plug and Play
15-05-47 IP Telephone Terminal
Basic Data Setup –
Registration Expire
Timer for NAT
15-05-48 IP Telephone Terminal
Basic Data Setup –
Subscribe Expire Timer
for NAT
84-10-XX ToS Setup
84-22-01 DT800/DT700 Multiline
Logon Information Set-
up – User ID
84-22-02 DT800/DT700 Multiline
Logon Information Set-
up – Password
84-22-03 DT800/DT700 Multiline
Logon Information Set-
up – User ID Omission
84-22-04 DT800/DT700 Multiline
Logon Information Set-
up – Log Off
84-22-05 DT800/DT700 Multiline
Logon Information Set-
up – Nickname
84-23-01 DT800/DT700 Multiline
Basic Information Set-
up –Registration Expire
Timer
84-23-02 DT800/DT700 Multiline
Basic Information Set-
up – Subscribe Expire
Timer
84-23-03 DT800/DT700 Multiline
Basic Information Set-
up – Session Expire
Timer
84-23-04 DT800/DT700 Multiline
Basic Information Set-
up – Minimum Session
Expire Timer
9-34
Description/Comments
Effective when Program 10-46-14 is
set to NAT Mode. Select sending RTP
port number to remote router, use
from negotiation result (0) or received
RTP packet (1).
On a per station basis, this setting de-
fines the SIP registration expiry timer.
If this value is set to 0, for a NAPT ter-
minal, the value in Program 84-23-01
is applied.
On a per station basis, this setting de-
fines the SIP Subscribe expiry timer.
If this value is set to 0, for a NAPT ter-
minal, the value in Program 84-23-02
is applied.
Assignments deal with setting of the
Layer 3 IP Header ToS field as it
leaves the VoIPDB unit.
Specify the protocol to assign the ToS
field for, and select the populated field
to conform to either IP Precedence or
Differentiated Services.
When setting IP Precedence, assign
Priority, Delay, Throughput, and Relia-
bility in Programs
84-10-01/02/03/04/05.
When setting DiffServ, only assign the
DSCP in Program 84-10-07.
User ID for Manual or Auto registra-
tion (Program 10-46-01).
Password for Manual or Auto registra-
tion (Program 10-46-01).
When set to manual login mode, the
user ID is omitted from the display
during entry by the user.
Allow the ability to log off from the IP
terminal when using manual registra-
tion mode.
Assign up to 32 Alpha/Numeric char-
acters.
At half the value of this timer the IP
terminal sends another registration
message to the CPU.
At half the value of this timer the IP
terminal sends another Subscribe
message to the CPU.
At half the value of this timer the IP
terminal sends a re-invite message.
Minimum time the CPU accepts a ses-
sion timer for a new call.
Assigned Data
0 = Off
1 = On
Default is 0
0 = Disable
60 ~ 65535 (sec)
Default is 180
0 = Disable
60 ~ 65535 (sec)
Default is 180
Protocol Type
1 = Not Used
2 = Not Used
3 = Reserved
4 = H.323
5 = RTP/RTCP
6 = SIP
7 = Reserved
8 = SIP MLT
9 = SIP Trunk
10 = Reserved
11 = Reserved
Assign up to 32 Alpha/
Numeric Characters
Default is No Setting
Assign up to 16 Alpha/
Numeric Characters
Default is No Setting
0 = Off
1 = On
Default is 0
0 = Off
1 = On
Default is 1
Assign up to 32 Alpha/
Numeric Characters
Default is No Setting
Range: 60~65535 Sec.
Default is 180
Range: 60~65535 Sec.
Default is 3600
Range: 0~65535 Sec.
Default is 180
Range: 0~65535 Sec.
Default is 180
IP Multiline Station (SIP)
ISSUE 1.0
1 2 3
X
X
X
X
X
X
X
X
X
X
X
X
X