NEC Sl2100 Networking Manual page 142

SL2100
8. The SIP MLT Station requires assignments to be made in the phone itself. Enter the Program
Mode in the station using the following steps.
The station does not require an Ethernet connection to enter the program mode. Only power is
required. Power can be provided by an AC adapter plugged into the phone or by POE provided by a
data switch. If the data switch is providing POE it must be using the 802.3AF standard.
For Basic bench testing only the following assignments are required.
• At this point, you are prompted with a User Name and Password. These are the defaults:
User Name: ADMIN
Password: 6633222
The user name should already be entered in the terminal.
• Press Set soft key to step down to the password field.
• After you enter the password, press OK soft key.
Network Settings
• DHCP Mode - DHCP Disable. Click OK.
• IP Address - Enter the IP Address for the station, and click OK.
• Default Gateway - Enter the Default Gateway Address, and click OK. If you are testing without a
router/gateway, this must be left at the default 0.0.0.0
• Subnet Mask - Enter the Subnet Mask for the station, and click OK.
SIP Settings
• Do not enter any information in the SIP user field. When the phone boots up, it requires a user
name and password. These are preassigned in the system. When entered correctly, the phone is
provided an extension number.
• Server Address & URI - 1
Enter the IP address assigned in command 10-12-09, and click OK.
• SIP Server Port - 1 st
Enter port 5080, and click OK.
• Press the EXIT key until you are back at the Main menu.
• Press the SAVE key, and the phone saves the configuration to memory, reboots itself and registers
with the CPU.
13.11 IP Phone Relocation
The IP Phone Relocation feature gives users access to their IP telephone from any location by using
the override login function. Users have the flexibility of logging into their IP Station in the office as well
as remotely at the home office.
IP Phone Relocation Override
IP Phone Relocation is a feature for overriding the registration of an IP phone from various locations.
To override the registration of an IP phone, you must have the login ID and Password of that IP phone.
Conditions
• Multiple IP Phones cannot use the same user ID and the same password at the same time.
• When a user is using multiple IP Phones at the same time, the user ID and password must be
different for each phone.
• When a user is using SoftPhone (CTI mode) and controlling the IP Phone by this SoftPhone, the
user ID and password should be different for the SoftPhone and IP Phone.
• An IP Phone (IP Phone and Soft phone) with DSS console cannot override another IP Phone.
9-44
st
Server Address
Server Port
ISSUE 1.0
IP Multiline Station (SIP)