NEC Sl2100 Networking Manual page 88

SL2100
8.2 System Availability
8.2.1 Terminals
All Multiline Terminals
8.2.2 Trunks
IP SIP
8.2.3 Required Component(s)
IP7( )-CPU-C1
IP7WW-VoIPDB-C1
SL2100 IP CHANNEL-16 LIC
SL2100 IP TRUNK-01 LIC
8.3 Programming
Program Program Name/Description
Number
10-02-01 Location Setup – Country Code
Enter the country code.
10-02-02 Location Setup – International Ac-
cess Codes
Enter the international access
code.
10-02-03 Location Setup – Other Area Ac-
cess Code
Enter the other area access code.
84-14-13 SIP Trunk Basic Information Setup
– Incoming/ Outgoing SIP Trunk
for E.164
When this data is set to 1, then for
any outbound SIP calls a + is add-
ed as a prefix to the Request-URI,
To and From header fields of the
SIP message.
When it is set to 2 then if the di-
aled international access code
matches the value in Program
10-02-02 this value is removed
from the number dialed and the +
added as a prefix to the Request-
URI, To and From header fields of
the SIP Message.
7-20
Input Data
Dial (maximum of four digits)
0 ~ 9, , #
*
Dial (maximum of four digits)
0 ~ 9, , #
*
Dial (maximum of four digits)
0 ~ 9, , #
*
0 = Off
1 = Mode 1
2 = Mode 2
3 = Mode 3
Profile (1 ~ 6)
ISSUE 1.0
Assigned Data Level
1
1 ✓
No Setting
✓
9
0
✓
SIP Trunking
2 3