Figure 9-29 Ip Phone List - NEC Sl2100 Networking Manual

SL2100
List in PC-Pro, the extensions are available for selection in Program 15 and other station related
Programs.
5. The SIP MLT Station requires assignments to be made in the phone itself. Enter the Program
Mode in the station using the following steps.
The station does not require an Ethernet connection to enter the program mode. Only power is
required. Power can be provided by POE provided by a data switch. If the data switch is providing
POE it must be using the 802.3AF standard.
For Basic bench testing only the following assignments are required:
• At this point you are prompted with a User Name and Password. These are the defaults:
User Name: ADMIN
Password: 6633222
The user name should already be entered in the terminal.
• Press Set soft key to step down to the password field.
• After you enter the password, press OK soft key.
Network Settings
• DHCP Mode – DHCP Disable. Click OK.
• IP Address – Enter the IP Address for the station, and click OK.
• Default Gateway – Enter the Default Gateway Address, and click OK. If you are testing without a
router/gateway, this must be left at the default 0.0.0.0
• Subnet Mask - Enter the Subnet Mask for the station, and click OK.
SIP Settings
• SIP User – Intercom Number
Enter the extension number for the IP station, and click OK.
• Server Address & URI – 1st Server Address
Enter the IP address assigned in command 10-12-09, and click OK.
• SIP Server Port - 1st Server Port
Enter port 5080, and click OK.
• Press the EXIT key until you are back at the Main menu.
9-40

Figure 9-29 IP Phone List

ISSUE 1.0
IP Multiline Station (SIP)