ISSUE 1.0
Program
Program Name
Number
84-24-34
DT800/DT700 Multiline
CODEC Basic Informa-
tion Setup – G.722 Jit-
ter Buffer Minimum
84-24-35
DT800/DT700 Multiline
CODEC Basic Informa-
tion Setup – G.722 Jit-
ter Buffer Average
84-24-36
DT800/DT700 Multiline
CODEC Basic Informa-
tion Setup – G.722 Jit-
ter Buffer Maximum
84-28-01
DT800/DT700 Multiline
Firmware Name Setup
– Firmware Directory
84-28-02
DT800/DT700 Multiline
Firmware Name Setup
– Firmware File Name
13.10 SIP MLT Quick Startup Guide
The following guides describe the setup for a SIP MLT from a default state for these modes:
• Plug and Play
• Automatic Registration
• Manual Registration
13.10.1 Plug and Play
1.
Program 10-12
Assign the VoIPDB registration/signaling IP address, subnet mask, and default gateway. If no
customer provided default gateway is provided, leave Gateway IP address at 0.0.0.0.
Networking Manual
Description/Comments
Minimum value of the dynamic jitter
buffer.
Average value of the dynamic jitter
buffer.
Maximum value of the dynamic jitter
buffer.
Maximum 64 characters.
Maximum 30 characters.
Figure 9-26 System Data 10-12: CPU Network Setup
Assigned Data
Range: 0 ~ 255ms
Default is 30
Range: 0 ~ 255ms
Default is 60
Range: 0 ~ 255ms
Default is 120
Default is No Setting
Default is No Setting
SL2100
1
2
3
X
X
X
X
X
9-37