Step 3: Spindle Run-In (Long) - Roland DWX-4W Setup Manual


Push the coolant tank toward the back of the machine.
Push the coolant tank to the point where you feel a click.
Make sure that the coolant tank is touching the back of the machine tightly.
Do not push the tank using the bottom-
cover.
Move the coolant tank slowly. Forcefully moving the coolant tank may cause the coolant to
spray out.

Continue on to "STEP 3: Spindle Run-In (Long)."

STEP 3: Spindle Run-In (Long)


Hold this with
both hands.
Steps to Perform Following Installation
Close the bottom cover.
This completes the filling of the coolant tank.
Close the front cover and turn on the power.
2. Installation and Setup
47