Operating Instructions
KEEP GUARDS IN PLACE and in working order.
MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starker keys.
DON'T OVERREACH. Keep proper footing and bal-
ance at all times.
DISCONNECT TOOLS before servicing; when
changing accessories, such as blades, bits, cutters, and
the like.
REDUCE THE RISK OF UNINTENTIONAL
STARTING. Make sure switch is in off position be-
fore plugging in.
NEVER STAND ON TOOL. Serious injury could oc-
cur if the tool is tipped or if the cutting tool is uninten-
tionally contacted.
CHECK DAMAGED PARTS. Before further use of
the tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function - check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other conditions
that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced.
NEVER LEAVE TOOL RUNNING UNATTENDED.
TURN POWER OFF. Don't leave tool until it comes
to a complete stop.
USE POWER SUPPLY CORD WHICH IS AT-
TACHED WITH PRODUCTS. Do not use other
power supply cord.
2