Roland DWX-4W Setup Manual page 2

Thank you very much for purchasing this product.
 To ensure correct and safe usage with a full understanding of this product's performance, please be sure
to read through this manual completely and store it in a safe location.
 Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
 The contents of this operation manual and the specifications of this product are subject to change without
notice.
 The operation manual and the product have been prepared and tested as much as possible. If you find
any misprint or error, please inform us.
 Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage which may
occur through use of this product, regardless of any failure to perform on the part of this product.
 Roland DG Corporation assumes no responsibility for any direct or indirect loss or damage which may
occur with respect to any article made using this product.
Applicable EMC Standards: EN 61326-1 (Class A), EN 55011 (Class A, Group 1), EN 61000-3-2, EN 61000-3-3
This is a Class A product.
In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
This product is a Group 1 device.
Radio frequency energies in the form of electromagnetic radiation, induction, and/or electrostatic bonding
are not used nor deliberately emitted when processing material or during examination/analysis.
Roland DG Corporation has licensed the MMP technology from the TPL Group.