Table of Contents
Advertisement
Installation
Preparing the Regulator
The regulator for this machine is the auto-drain type. Failing to prepare the regulator properly can cause leak-
age. Be sure to follow the procedure to prepare the regulator.
WARNING
Bowl
Procedure
Attach the air hose to the regulator.
To source of
compressed air
WARNING
Supply compressed air and verify that air does not leak from the connections or any
other location.
36
2. Installation and Setup
Before supplying compressed air, make sure that the bowl is securely
attached.
If the bowl is not properly attached, it may come flying off.
Bowl
Securely insert the air hose as far as it will go. Lightly tug
the hose to make sure it does not come loose.
If it is not inserted securely, it may come loose.
To attach: Insert firmly as far as it
will go.
To detach: Press and hold the ring,
and pull out.
Advertisement
Table of Contents
