Adjust the air pressure.
Pull up on the upper knob (the air pressure adjustment knob).
Slowly turn the upper knob.
Adjust until the meter reads between 0.6 and 0.8 MPa.
Push down on the upper knob.
WARNING
Loosen
(Increase the
pressure.)
Prepare a fluid receptacle.
Use the drain hoses (included) or a tray.
Drain hose
Turn the drain hose entirely
when attaching it.
Turn the air pressure adjustment knob slowly and carefully.
Otherwise, the machine may move suddenly, posing a risk of injury.
Upper knob
Be sure to configure the regulator to 0.8 MPa
Tighten
or lower. Anything higher may result in a
(Decrease the
malfunction.
pressure.)
Important
2. Installation and Setup
Installation
37