Preparing for Milling
Preparing a Workpiece (Usable Workpieces)
Workpiece Materials
Glass ceramics
Composite resins
Types and Sizes of Workpieces
Type: Type with pin
Maximum number of mountable workpieces: 3
Maximum size of mountable workpieces: 40 (W) × 20 (D) × 20 (H) mm
* However, the workpiece size is limited by the number of workpieces mounted in the machine,
and the number of mountable workpieces is limited by the size of the workpieces mounted in the machine.
Preparing a Milling Bur
Usable Milling Burs
Dedicated milling bur (3 types)
Setting Milling Burs in the ATC Magazine
Set the milling burs in stockers #1 to #4 of the ATC magazine. Set the different types of milling burs in the stocker numbers
according to the milling data settings.
Ensure that the tips of the burs face down. Exercise caution regarding the orientation of the burs.
Preparing Compressed Air (Setting the Regulator)
Recommended Set Pressure
0.6 MPa to 0.8 MPa
17
2. Milling