Hach AutoCAT 9000 Instruction Manual page 156

Printer Installation and Setup
5.
Scroll through the
method parameters. Press
to select Printouts.
9.
Enable or Disable
Detail.
Press the
CHECK MARK
to validate.
Note: If Detailed is enabled,
the printout will include the
titrant certificate number,
concentration and install date,
and the electrode used.
13.
Enable or Disable
Line Fit
.
Press the
CHECK MARK
to validate.
Note: If Line Fit is enabled, the
printout will plot the line that
was fit to the analysis curve.
Printer Installation and Setup
Page 154
6.
Highlight Title.
2 Press the
CHECK MARK
to change.
10.
Highlight Curve.
Press the
CHECK MARK
to change.
14.
Press three times to
ESC
return to the Methods menu.
7.
Use the keypad to enter
a printout title.
Press the
CHECK MARK
to validate.
11.
Enable or Disable
Curve.
Press the
CHECK MARK
to validate.
Note: If Curve is enabled the
the calibration curve will
printout. The Curve option can
also customize the Line fit.
8.
Highlight Detailed.
Press the
CHECK MARK
to change.
12.
Highlight Line Fit.
Press the
CHECK MARK
to change.
50081_PrinterInstallation.fm