Hach AutoCAT 9000 Instruction Manual page 110

Total Chlorine
17.
Use the navigation keys
to select two line segments,
one on each side of the
titration end point, by
positioning cursors at the
beginning and end of each
segment.
Press the to
CHECK MARK
confirm changes or press
to return to the previous
DEL
window.
Note: For more information on
manual EP determination, see
page 135.
21.
Press to select
1
Continue for additional tests
and/or samples.
Press to select More Details
2
to view analysis statistics for
the current Sample ID.
Total Chlorine
Page 108
18.
Press the
CHECK MARK
to accept the analysis.
Proceed to step 21. Press
to return to the previous
DEL
window (Zoom Range
Determination) to adjust the
linear segments and
reanalyze the data.
22.
Press to select
1
New Test to run a replicate
sample.
Press to select New Sample
2
to analyze a new sample, see
Sample Tips and Techniques
on page 105.
Press to select
3
End Analysis to return to the
Methods menu.
19.
The AutoCAT will run
the analysis based on the
automatic selection of linear
segments.
Note: The automated analysis
requires approximately
1 minute to complete.
20.
Press the
CHECK MARK
to accept the analysis, or
press to return to the
DEL
previous window (Zoom
Range Determination) to
adjust the linear segments
and reanalyze the data.
50081_Chlorine_Total_Forward.fm