Cable Connection
32
4. As shown in the diagram below, begin connecting the highest node of the
network and connect the lower nodes in order. Cover the upper connector
(SL1) of the highest node, and connect SL2 to SL1 of the next node. Con-
tinue connecting this way until the lowest node is reached and cover SL2 of
the lowest node.
Higher nodes
Optical
Connector
Cover
C1000H-SLK11
5. Allow sufficient clearance between the bottom of the Unit and the cable to
prevent the cable from being bent too much, as shown in the diagram below.
(The clearances are in millimeters.)
C1000H-SLK11
60
55
200
Lower nodes
C1000H-SLK11
C200HW-SLK13/14
C200HW-SLK13/14
200
Section 3-4
Optical
Connector
Cover