Omron SYSMAC LINK C1000H-SLK21-V1 System Manual page 45

Cable Connection
Precautions
1, 2, 3...
6. If the cable has tension wires, tighten the terminal screws to secure them.
Nut
Mounting
bracket
(1)
Note Tighten the screws on the mounting bracket firmly.
1. Use only the Hard Plastic-clad Optical Fiber Cable (H-PCF) listed in Appen-
dix A Standard Models .
2. Any bends in the cable must be 10 cm in radius or greater.
3. Always hold the connector firmly when inserting or removing the cables.
Terminal
(2)
(1)
(4)
Section 3-4
(3)
(6)
Tension
wires
(5)
31