Omron SYSMAC LINK C1000H-SLK21-V1 System Manual page 157

CTS
CTS signal
CV Support Software
CV-mode
CV-series PC
CVSS
DAC
daisy-chain
Data Access Console
data area
data area boundary
data length
data link
data link area
data link table
data sharing
decrement
default
digit
DIN track
Glossary
An acronym for clear-to-send, a signal used in communications between elec-
tronic devices to indicate that the receiver is ready to accept incoming data.
A signal used in communications between electronic devices to indicate that the
receiver is ready to accept incoming data.
A programming package run on an IBM PC/AT or compatible to serve as a Pro-
gramming Device for CV-series PCs.
A form of communications useable only with CV-series PCs. See C-mode .
Either of the following PCs: CV500 or CV1000.
See CV Support Software .
See Data Access Console .
A serial connection method in which each device is connected through the pre-
vious device.
A Programming Device used to monitor and control memory area contents. The
Data Access Console does not afford the wide range of programming capabili-
ties as the GPC or CVSS and is designed for system monitoring and mainte-
nance.
An area in the PC's memory that is designed to hold a specific type of data,
e.g., the LR area is designed for to hold common data in a PC Link System.
The highest address available within a data area. When designating an operand
that requires multiple words, it is necessary to ensure that the highest address in
the data area is not exceeded.
In communications, the number of bits that is to be treated as one unit in data
transmissions.
An automatic data transmission operation that allows PCs or Units within PC to
pass data back and forth via common data areas.
A common data area established through a data link.
A table of settings kept in memory that specifies what words are to be part of a
data link for all PCs involved in the link.
An aspect of SYSMAC Link Systems and SYSMAC NET Link Systems in which
common data areas or common data words are created between two or more
PCs.
Decreasing a numeric value, usually by 1.
A value automatically set by the PC when the user does not specifically set
another value. Many devices will assume such default conditions upon the
application of power.
A unit of storage in memory that consists of four bits.
A rail designed to fit into grooves on various devices to allow the devices to be
quickly and easily mounted to it.
143