Sensor (Cartridge Door Interlock) Removal; Stapler Door Close Limit Switch Removal - Lexmark MX81 Series Service Manual

Sensor (cartridge door interlock) removal

1
Remove the stapler right cover. See
2
Disconnect the cable (A) from the sensor.
3
Release the latches from the stapler assembly frame, then remove the sensor (B).

Stapler door close limit switch removal

1
Remove the stapler left cover. See
2
Remove the stapler right cover. See
3
Remove the stapler top cover. See
"Stapler right cover removal" on page
"Stapler/offset stacker left cover removal" on page
"Stapler right cover removal" on page
"Stapler/offset stacker top cover removal" on page
Repair information
621
617.
597.
617.
599.
7463