Removing The Audio Daughter-Board; Prerequisites; Procedure - Dell XPS 15 Service Manual

Identifier
Status
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

1 Remove the base cover.
2 Remove the battery (half-length)
3 Remove the memory modules.
4 Follow the procedure from step 1 to step 4 in
5 Remove the solid-state drive (half-length)
6 Remove the wireless card.
7 Remove the fans.
8 Remove the heat sink.
9 Remove the system-board
Identifier
Status

Procedure

1 Remove the two screws (M2x3) that secure the audio daughter-board to the system-board assembly.
2 Lift the audio daughter-board off the system board.
GUID-3C23730D-19FE-4A80-8998-9A85C2DCE934
Released

Removing the audio daughter-board

computer. After working inside your computer, follow the instructions in
GUID-44D35805-8B60-4013-B93B-9D1ACACD3E33
Released
or the battery (full-length).
"Removing the hard
or the solid-state drive
assembly.
GUID-C0E536CB-A5B6-46D2-B284-ECC799DFCD03
Released
drive".
(full-length).
Removing the audio daughter-board
27
After working inside
www.dell.com/
55