Steps
1. Align the screw holes on the heat sink with the screw holes on the system board.
2. In sequential order (1 > 2 > 3 > 4 > 5 > 6 > 7), as indicated by the numbers on the heat sink, install the seven screws
(M2.5x5) to secure the heat sink to the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Audio-daughter board
Removing the audio-daughter board
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image indicates the location of the audio-daughter board and provides a visual representation of the removal
procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
27